Amplifiers Plinius 9200


Bảo Hành: 12 tháng.

Lắp Đặt, Tư Vấn: Miễn phí.

Giao Hàng: Tận Nơi.

Liên Hệ: * 0979.469.678 *

In stock


200 Watts per channel (8 Ohms)

300 Watts per channel (4 Ohms)

Frequency Response:

20Hz to 20kHz ±0.2dB. -3dB at 5Hz and -3dB at 70kHz


Typically <0.05% THD at rated power. 0.2% THD and IM worst case prior to clipping. Current Output: 40A short duration peak per channel. Fuse protected. Slewing: 50V/µs. Hum & Noise: 90dB below rated output 20Hz to 20kHz unweighted. Input Sensitivity: 300mV RMS for rated output at 1kHz. 1.5mV RMS on Phono low gain setting. 0.75mV on Phono high gain setting Input Impedance: 47kΩ Input Overload: 5V RMS Phono Stage Gain: 61dB on high gain setting, 54dB on low gain setting Rated PreOut Level: 1.5V RMS into 47kΩ or higher. Maximum 6V RMS into 10kΩ or higher. Pre Out Source Impe. Typically 1.5kΩ Pre Out Minimum: 47kΩ Tape Output Level: 190mV at 200Ω. Tape loop muting at 5V RMS input Dimension (W x H x D): 450 x 120 x 400 mm Weight: 14 kg